LTC3802EGN#PBF Overview

It comes in the 28-SSOP (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. There is sufficient capacity to generate switching controller for outputs 2. PMIC is packaged in a solid enclosure of Tube. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sA 3V~30V voltage is supplied to the dc control and used for operating it. Suitable for working in an dc switcher that has a -40°C~85°C TA. There is a switch at 330kHz~750kHz that can be used with this controller. It is suitable for general dc dc regulator when it is set to Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Power Good, Soft Start. Connected to a DUAL SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Thare switching converters has a terminal (s) at DUAL . The 28 terminations can be used for a wide range of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 5V. Searching "LTC3802" will return other relevant dc to dc converter ics. There are 28 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. A 30V voltage of DC regulator was detected in the test statistics. There is 550kHz frequency setting on the switching controller. The maximum input voltage of dc switcher is 30V, so users should limit their voltage accordingly. Channels are 1 for high-quality communication.

LTC3802EGN#PBF Features

Transistor Driver Outputs
Switching Frequency: 330kHz~750kHz
Current Limit, Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
Frequency: 550kHz

LTC3802EGN#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC3802EGN#PBF DC to DC converter applications.

• Digital display device
• Medical equipment
• Printing
• Program control systems
• Fire elevators
• Wide-range voltage regulation circuits
• Automatic testing equipment
• Current source circuits
• Balance equipment
• Low output voltage switching power supply circuits