LTC3803MPS6-5#TRMPBF Overview

The switching controller fits in the SOT-23-6 Thin, TSOT-23-6 package and is ideal for most applications. A solid enclosure of Tape & Reel (TR) surrounds pmic. There are Transistor Driver dc switching's output (s) that it can handle. The supply and operating voltage of the dc control are 4V~8.1V. Suitable for working in an dc switcher that has a -55°C~150°C TJ. The switching controller can be switched at 200kHz. Surface Mount makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 6 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 5V. Other relevant dc to dc converter ics will be returned if you search "LTC3803". Pins number 6 of switching converter in total. Switching converter is a special type of Switching Regulator or Controllers. An input voltage of 4.9V is the minimum required for the dc dc voltage regulator. A maximum voltage of 5.7V is accepted by the dc to dc regulator as an input voltage. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 80 %. DC regulators have a maximum frequency of 230kHz. As a result, switching converter outputs current to the greatest value possible (1A). With this controller, the phase is 1.

LTC3803MPS6-5#TRMPBF Features

Transistor Driver Outputs
Switching Frequency: 200kHz
Current Limit, Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %

LTC3803MPS6-5#TRMPBF Applications

There are a lot of Linear Technology/Analog Devices LTC3803MPS6-5#TRMPBF DC to DC converter applications.

• SMT equipment
• Driver circuits
• Laboratories
• Surface processing equipment
• Various precision measuring detectors
• Flaw detection equipment
• Hydraulic presses
• Die casting equipment
• Printing equipment
• Analog precision reference circuits