LTC3838IUHF-2#PBF Overview

Capsuled in the 38-WFQFN Exposed Pad package, the switching controller suits most application needs. dc motor controller is suitable for 2 output generation. An enclosure of Tube is used to package the PMIC. There are Transistor Driver dc switching's output (s) that it can handle. 4.5V~38V is the operating voltage and supply voltage of the dc control. Work well in dc switchers with a -40°C~125°C TJ. With this switching controller, you can switch at 200kHz~2MHz. It is suitable for general dc dc regulator when it is set to Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking. A DUAL SWITCHING CONTROLLER analog IC is connected to the switch converters. Thare switching converters has a terminal (s) at QUAD . An array of 38 terminations of dc switching. The nominal DC switcher's voltage input is 15V. Other relevant dc to dc converter ics can be found by searching "LTC3838". 38 pins are present on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 4.5V. If you are starting a new project, you should note the dc dc regulator's typical output current is 25A. It is estimated that this dc regulatorhas a maximum frequency of 2MHz. As a result, DC to DC voltage regulator has a value of OUTPUT VOLTAGE RANGE FROM 0.6 VOLT TO 5.5 VOLT so that the need can be met more directly. There are several dc to dc voltage regulator in the PolyPhase? series.

LTC3838IUHF-2#PBF Features

Transistor Driver Outputs
Switching Frequency: 200kHz~2MHz
Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking
OUTPUT VOLTAGE RANGE FROM 0.6 VOLT TO 5.5 VOLT

LTC3838IUHF-2#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC3838IUHF-2#PBF DC to DC converter applications.

• Fire elevators
• Ball screw pair
• Wide-range voltage regulation circuits
• Communication system
• Production lines
• Motor controller circuits
• Grinders
• Special machining machine tools
• Handheld GPS
• Die casting equipment