LTC3838IUHF#PBF Overview

In the 38-WFQFN Exposed Pad package, the switching controller meets most application requirements. This dc motor controller can be used to generate outputs with 2 numbers. There is a Tube solid enclosure around the pmic. The program can handle Transistor Driver dc switching's outputs (s). A 4.5V~38V voltage is supplied to the dc control and used for operating it. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller can be switched at 200kHz~2MHz. dc dc regulators can be carried out with Surface Mount. Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking provides dcdc regulator efficient switching control. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. QUAD are the position of the terminal of the switching converters. A variety of 38 terminations are available in dc switching. The DC switcher's nominal voltage is 15V. LTC3838 can be used to locate other relevant dc to dc converter ics. There are a total of 38 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. 4.5V should be the minimum input voltage for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 5.5V. If you are starting a new project, you should note the dc dc regulator's typical output current is 25A. DC regulators have a maximum frequency of 2MHz. DC to DC voltage regulator has the value of OPERATE IN ADJUSTABLE MODE FROM 0.6 TO 5.5V to better satisfy the requirement. It belongs to the PolyPhase? series of dc to dc voltage regulator. Communication on 1 channels is high-quality.

LTC3838IUHF#PBF Features

Transistor Driver Outputs
Switching Frequency: 200kHz~2MHz
Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking
OPERATE IN ADJUSTABLE MODE FROM 0.6 TO 5.5V

LTC3838IUHF#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC3838IUHF#PBF DC to DC converter applications.

• Computer application technology
• Telecommunications equipment
• Industrial robots
• Packaging
• Television equipment
• Laboratories
• Analog precision reference circuits
• Servo drive system
• Geothermal power
• Correction machines