LTC3839EUH#PBF Overview

In the 32-WFQFN Exposed Pad package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 2. There is a Tube solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 4.5V~38V volts and has 4.5V~38V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. It can switch at 200kHz~2MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking is included in the dcdc regulator. A SWITCHING REGULATOR analog integrated circuit is connected to the switch converters. QUAD are the position of the terminal of the switching converters. Various 32 terminations. There is a DC switcher's nominal voltage of 15V. In addition to "LTC3839", there are other relevant dc to dc converter ics you can find. There are 32 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the dc dc voltage regulator's minimum input voltage be 4.5V. DC regulator outputs 5.5V voltage based on test statistics. The dc to dc regulator can only accept 38V input voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 25A. DC regulator2MHz has the maximum frequency. The dc to dc voltage regulator is from the PolyPhase® series. Communication on 1 channels is high-quality.

LTC3839EUH#PBF Features

Transistor Driver Outputs
Switching Frequency: 200kHz~2MHz
Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking

LTC3839EUH#PBF Applications

There are a lot of Linear Technology/Analog Devices
LTC3839EUH#PBF DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment