LTC3862EUH-2#PBF Overview

It comes in a 24-WQFN Exposed Pad package, so switching controller can be used for most applications. It is sufficient to generate 2 outputs with this dc motor controller. An enclosure of Tube is used to package the PMIC. There are Transistor Driver dc switching's output (s) that it can handle. The supply and operating voltage of the dc control are 5.5V~36V. Worked in an dc switcher with a -40°C~85°C TA rating. With this switching controller, you can switch at 75kHz~500kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Enable, Frequency Control, Phase Control, Soft Start is used for efficient switching control in the dcdc regulator. Switch converters are connected to ICs with DUAL SWITCHING CONTROLLER analog outputs. DUAL are the position of the terminal of the switching converters. Various 24 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. A search for "LTC3862" will reveal other relevant dc to dc converter ics. Pins number 24 of switching converter in total. Switching converter is a special type of Switching Regulator or Controllers. It is recommended to use 5.5V as the minimum input voltage of dc dc voltage regulator. Based on the test statistics, DC regulator outputs voltage 3.8V. A maximum voltage of 36V is accepted by the dc to dc regulator as an input voltage. It is estimated that this dc regulatorhas a maximum frequency of 500kHz. In order to satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES AT 10V.

LTC3862EUH-2#PBF Features

Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES AT 10V

LTC3862EUH-2#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC3862EUH-2#PBF DC to DC converter applications.

• Wide-range voltage regulation circuits
• USB circuits
• Experimental setup
• Flexible manufacturing cells
• SMT equipment
• Emergency lighting monitoring equipment
• Precision electronic equipment
• Industrial controllers
• Hydro power
• Geothermal power