LTC4050EMS-4.1#PBF Overview

I found it in the Tube package, which comes with everything you need.The package 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) includes a version of it.A Surface Mount mounting type is assigned to the device.If the temperature is set to -40°C~85°C TA, reliable performance will be assured.A analog IC of POWER SUPPLY SUPPORT CIRCUIT has been used in the design of this device.Device charging requires Constant - Programmable current.The base part number LTC4050 represents its related parts.As far as the terminations are concerned, there are 10.The device has 10 pins in total.Features such as Timer are programmable.You need 10 pins for it to work.Channels are available in a total of 2.Using a 6V battery should be enough to run it.As long as the supply voltage is 10V, it is capable of withstanding the voltage.Using a 4.1V output voltage results in high efficiency.There is a constant output current of 500mA when it is operating.The device you are looking at belongs to the subcategory of Power Management Circuits.The device can operate at as low a supply voltage as possible, such as 4.5V.It was determined during the design process that Vsup (maximum supply voltage) should be set to 3mA.A power supply setting of 0 has been assigned to the part.As far as the input voltage is concerned, it has a minimum of 4.5V volts.There is a maximum input voltage of 10V volts that it can take.It is required that a maximum supply voltage of 4.1V be applied as the output voltage for this operation.

LTC4050EMS-4.1#PBF Features

2 channels
Power Management Circuits subcategory
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package

LTC4050EMS-4.1#PBF Applications

There are a lot of Linear Technology/Analog Devices
LTC4050EMS-4.1#PBF Battery Chargers ICs applications.

• Forklift
• Pallet jacks
• Personnel carriers
• Maintenance shops
• Rental fleets
• Truck dealers
• Floor scrubber
• Material handling
• Man lift
• Boat