LTC4210-1CS6#TRMPBF Overview

You can find it in the SOT-23-6 Thin, TSOT-23-6 package.At the moment, 1 channels are accessible.In the form of a Cut Tape (CT), it is packaged.The terminations total 6.In this case, the device is located at terminal DUAL.The device has a total of 6 pins.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 5V.Surface Mount has set it up this way.An electrical component classified as Hot Swap Controller belongs to this category.Ensure reliable operation by setting the temperature to 0°C~70°C.A General Purpose application is available for the device.There is a mention of it in Auto Retry.In theory, it should work as long as the power source has a 2.7V~16.5VV input.This number is a member of the LTC4210 family.In order to operate, 6 pins are used.The programmable features of this device are Current Limit, Fault Timeout, OVP, Slew Rate, UVLO.Presently, there is a limited supply of 650μA.Normally, Vsup should remain above 2.7V.The maximum operating current is 3.5mA.3V output voltages are capable of high efficiency.

LTC4210-1CS6#TRMPBF Features

The terminal position of 6
Features of Auto Retry
Programmable features of Current Limit, Fault Timeout, OVP, Slew Rate, UVLO
Output voltage of 3V

LTC4210-1CS6#TRMPBF Applications

There are a lot of Linear Technology/Analog Devices
LTC4210-1CS6#TRMPBF hot swap controllers applications.

• Industrial
• Datacom
• Electric vehicle
• Avionics systems
• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane