LTC4214-1CMS#TRPBF Overview

In the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package you will find it.Channel 1 is currently available.A Tape & Reel (TR)-shaped package holds it.The 10 terminations total to three.Device DUAL is located at the terminal position.The device consists of a total of 10 pins.The supply voltage 12V is necessary for high efficiency.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller.A reliable operation requires the temperature to be set to 0°C~70°C.Apps for General Purpose are available on the device.A feature of Latched Fault describes it.Using a 6V~16VV power source should be able to power the device.The LTC4214 family includes it.Hot-swappable device has Current Limit, Fault Timeout, OVP, UVLO programmable features.Presently, there is a sufficient supply of 800μA.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 6V so that the device can function normally.The maximum supply current it requires to operate is 2mA.

LTC4214-1CMS#TRPBF Features

The terminal position of 10
Features of Latched Fault
Programmable features of Current Limit, Fault Timeout, OVP, UVLO

LTC4214-1CMS#TRPBF Applications

There are a lot of Linear Technology/Analog Devices
LTC4214-1CMS#TRPBF hot swap controllers applications.

• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems