LTC4218CDHC-12#TRPBF Overview

In the 16-WFDFN Exposed Pad package you will find it.Channel 1 is currently available.A Tape & Reel (TR)-shaped package holds it.The 16 terminations total to three.Device DUAL is located at the terminal position.The device consists of a total of 16 pins.The supply voltage 12V is necessary for high efficiency.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller, Monitor.A reliable operation requires the temperature to be set to 0°C~70°C.Apps for ATCA, MicroTCA™ are available on the device.A feature of OVP, UVLO describes it.Using a 2.9V~26.5VV power source should be able to power the device.The LTC4218 family includes it.Hot-swappable device has Auto Retry, Current Limit, Fault Timeout, Latched Fault programmable features.Presently, there is a sufficient supply of 1.6mA.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 2.9V so that the device can function normally.Vsup is set to 26.5V, the maximum supply voltage.The maximum supply current it requires to operate is 5mA.

LTC4218CDHC-12#TRPBF Features

The terminal position of 16
Features of OVP, UVLO
Programmable features of Auto Retry, Current Limit, Fault Timeout, Latched Fault

LTC4218CDHC-12#TRPBF Applications

There are a lot of Linear Technology/Analog Devices
LTC4218CDHC-12#TRPBF hot swap controllers applications.

• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems