LTC4301IMS8#PBF Overview

To make transportation easier, the power buffer is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).Power buffer ready in Tube packages.Surface Mount Universal mout allows easy adaptation.Typical Buffer, ReDriver type.As a result, the op amp buffer is powered by 2.7V~5.5V voltage.In order for the output quality to be maintained, 2 channels must work together.The system facilitates the input of 2-Wire Bus.As a precaution, it is recommended that you set the operating temperature to -40°C~85°C in order to avoid malfunctioning.It targets applications such as I2C - Hotswap and others.In order to find more pin-to-pin solutions that suit your specific needs, try searching with "LTC4301".A 8 terminal can be found on the op amp buffer.During reflow, the peak temperature of the material is determined by the number 260.This splitter can accomplish a great deal of demanding work when supplied with 3.3V voltage.It is important to note that the pinout of the Power buffer starts from the 8 pins that it has.Output is expressed in 2-Wire Bus.The 8 pins are on it.Basically, it's a 4.5mA op amp buffer.It is mounted on PCBs or other boards using a Surface Mount.If you feed the repeter with a voltage higher than 5.5V, you are not supposed to use the repeter.

LTC4301IMS8#PBF Features

2 channels.
Mainly used in I2C - Hotswap.

LTC4301IMS8#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC4301IMS8#PBF Signal Buffers, Repeaters, Splitters applications.

• SATA SSDs or HDDs
• Industrial/Embedded PC
• Servers
• Desktop Computers
• Cellular Phone Base Stations
• Storage Area Networks
• Protection Switching
• PECL-to-LVDS Translation
• Communications Switchers
• Digital Cross-Connects