LTC4309CDE#PBF Overview

This power buffer comes packaged in 12-WFDFN Exposed Pad so that it can be transported easily.The package is ready for power buffer in Tube pieces.A universal mout that is easy to adapt.As for types, this is an example of a typical Buffer, Accelerator.The op amp buffer is powered by 2.3V~5.5V voltage.It is important to maintain the output quality by cooperating between the 2 channels.As a result, there is a 2-Wire Bus input that is enabled.The operating temperature should be set to 0°C~70°C to avoid mal-function.In addition to I2C - Hotswap, this operational amplifier buffer targets other applications.For more pin-to-pin solutions, try "LTC4309".There is a 12 terminal on the op amp buffer, which can be seen in the picture below.The peak reflow temperature is 260.This splitter is supplied with 3.3V voltage, which allows it to perform a variety of demanding tasks.From the power buffer's 12 pins, we can determine its pinout.It outputs in 2-Wire Bus.Pins on its 12 axis are present.As the name suggests, they are a 7mA op amp buffers.The Surface Mount on the board allows it to be mounted on PCBs or other boards.The repeter should not be fed with voltages higher than 5.5V.

LTC4309CDE#PBF Features

2 channels.
Mainly used in I2C - Hotswap.

LTC4309CDE#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC4309CDE#PBF Signal Buffers, Repeaters, Splitters applications.

• Cable Repeaters
• Data or Clock Signal Amplification
• Industrial PCs
• Multidrop Buses
• Portable IPC/HMI
• Cellular Phone Base Stations
• Storage Area Networks
• Digital Crossconnects
• Servers
• Industrial Server