LTC4313CDD-3#PBF Overview

A convenient transportation package of power buffer is provided in 8-WFDFN Exposed Pad.In a package of Tube it is ready for power buffer.Surface Mount universial mout for easy adapting.As for types, this is your typical Buffer, Accelerator.In order to function, this op amp buffer requires 2.9V~5.5V voltage.Maintaining output quality requires cooperation between 1 channels.2-Wire Bus input can be accommodated.To avoid malfunctions, you should set the operating temperature to 0°C~70°C.It is designed for use by I2C - Hotswap as well as other applications.With "LTC4313," you will find more pin-to-pin solutions.On the op amp buffer, you will find 8 terminals.Reflow temperature at its peak is calculated to be NOT SPECIFIED.3.3V voltage provides the splitter with the power it needs to handle a wide range of demanding tasks.Power buffer pinouts begin with 8 pins.2-Wire Bus is the output format.There are 8 pins on the op amp buffers.It has a Surface Mount for mouting on PCB or other boards.There is a voltage of 8.1mA which is used to power this power buffer.It is not recommended to feed the repeter with a voltage higher than 5.5V.In order to start up the splitter, it will need at least 2.9V.

LTC4313CDD-3#PBF Features

1 channels.
Mainly used in I2C - Hotswap.

LTC4313CDD-3#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC4313CDD-3#PBF Signal Buffers, Repeaters, Splitters applications.

• Data or Clock Signal Amplification
• Communications Switchers
• Laptop Computers (for External Video Cards)
• Clock Distribution
• Cellular Phone Base Stations
• Cable Repeaters
• Network Switches/Routers
• Add/Drop Muxes
• Protection Switching
• Backplane Interconnect