LTC4313IMS8-2#PBF Overview

Packaging is convenient because power buffer comes in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).Tube packages are ready for power buffer.A universal mout that is easy to adapt.It is important to note that this is a typical Buffer, Accelerator type.This op amp buffer uses 2.9V~5.5V voltage for work.Hence, it facilitates the entry of 2-Wire Bus into the system.It is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.The operational amplifier buffer is aimed at I2C - Hotswap and other applications as well.To find pin-to-pin solutions that fit your specific requirements, try searching with the letter "LTC4313".The op amp buffer has 8 terminals that you can find on the side.3.3V voltage provides the splitter with the power it needs to handle a wide range of demanding tasks.It is important to note that the pinout of the Power buffer starts from the 8 pins that it has.2-Wire Bus is what it outputs as the output format.In addition, it has 8 pins.It has a Surface Mount for mouting on PCB or other boards.In order for this power buffer to operate, a voltage of 8.1mA must be applied.Repeters cannot be fed voltages higher than 5.5V.In order for it to work, it requires 2.9V at least.A 1 receiver is implemented in this repeater signal.

LTC4313IMS8-2#PBF Features

Mainly used in I2C - Hotswap.

LTC4313IMS8-2#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC4313IMS8-2#PBF Signal Buffers, Repeaters, Splitters applications.

• PECL-to-LVDS Translation
• Cable Repeaters
• Industrial PCs
• Backplane Interconnect
• Medical
• Industrial Server
• Servers
• Digital Crossconnects
• Data or Clock Signal Amplification
• Network Switches/Routers