LTC4315CMS#PBF Overview

This power buffer comes packaged in 12-TSSOP (0.118, 3.00mm Width) so that it can be transported easily.A total of Tube packages are available for shipping of power buffer.Easily adaptable Surface Mount universal mouthpiece.As for types, this is your typical Buffer, Accelerator.This op amp buffer uses 2.9V~5.5V voltage for work.As a result, 1 channels collaborate to maintain output quality.It facilitates input from 2-Wire Bus sources.To avoid malfunctioning, the operating temperature should be set to 0°C~70°C.Among its applications are I2C - Hotswap.You can get more pin-to-pin solutions for your specific needs by searching with "LTC4315".An op amp buffer of the op amp buffer is equipped with 12 terminals.Its peak reflow temperature is NOT SPECIFIED.This splitter consists of 3.3V voltage and is able to accomplish a variety of tasks that are splittericularly demanding.Power buffer pinouts begin with 12 pins.In the output, 2-Wire Bus is used.With 12 pins, it is connected.For mounting on PCBs or other boards, it has a Surface Mount.The power buffer is powered by 8.1mA voltage.You are not supposed to feed the repeter with voltage higher than 5.5V.The splitter must have at least 2.9V to be able to start up.

LTC4315CMS#PBF Features

1 channels.
Mainly used in I2C - Hotswap.

LTC4315CMS#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC4315CMS#PBF Signal Buffers, Repeaters, Splitters applications.

• Data or Clock Signal Amplification
• Backplane Interconnect
• PECL-to-LVDS Translation
• Industrial Server
• Digital Cross-Connects
• Storage Area Networks
• Cable Repeaters
• Loopback
• Test Equipment
• Cellular Phone Base Stations