LTC4315IDE#TRPBF Overview

As a convenience to the user, power buffer has been packaged in 12-WFDFN Exposed Pad.Ready for shipping in Tape & Reel (TR) package.An easy-to-adjust universal mout.Here's a typical Buffer, Accelerator.There is no voltage involved in the operation of this op amp buffer.In order for the output quality to be maintained, 1 channels must work together.Input of 2-Wire Bus is enabled by it.As a precaution, it is recommended that you set the operating temperature to -40°C~85°C in order to avoid malfunctioning.The operational amplifier buffer is targeted at applications such as I2C - Hotswap and others.With "LTC4315," you will find more pin-to-pin solutions.There are 12 terminals on the op amp buffer that you can find.During reflow, the peak temperature of the material is determined by the number NOT SPECIFIED.3.3V voltage provides the splitter with the power it needs to handle a wide range of demanding tasks.This Power buffer has a pinout that starts from its 12 pins, which are the first pins on the board.Outputs are in 2-Wire Bus.It is a 8.1mA op amp buffer.There is no point in feeding the repeter with voltage higher than 5.5V if you are not supposed to.There is a minimum requirement of 2.9V to start the splitter.

LTC4315IDE#TRPBF Features

1 channels.
Mainly used in I2C - Hotswap.

LTC4315IDE#TRPBF Applications

There are a lot of Linear Technology/Analog Devices LTC4315IDE#TRPBF Signal Buffers, Repeaters, Splitters applications.

• DSLAMs
• Test Equipment
• SATA SSDs or HDDs
• PECL-to-LVDS Translation
• Network Switches/Routers
• Medical
• Industrial PCs
• Cellular Phone Base Stations
• Desktop Computers
• Storage Area Networks