LTC4315IMS#TRPBF Overview

There is a package of 12-TSSOP (0.118, 3.00mm Width) for easy transportation of this power buffer.Tape & Reel (TR) packages are ready for power buffer.Surface Mount A universal mout for easy adaptation to a wide range of heads.Type-wise, this is a Buffer, Accelerator.2.9V~5.5V voltage is used to power this op amp buffer.The output quality is maintained by collaborating between 1 channels.As a result, 2-Wire Bus input is facilitated.In order to prevent malfunctions, the operating temperature should be set to -40°C~85°C.In addition to applications for I2C - Hotswap, this operational amplifier buffer is also intended for other applications.You can also try searching with "LTC4315" when you need specific pin-to-pin solutions for your special needs.12 terminals are on the op amp buffer.There is a maximum reflow temperature of NOT SPECIFIED for the op amp buffers.Due to the 3.3V voltage supply, this splitter can handle a multitude of demanding tasks.Power buffer pinouts start from 12 pins.The output is in the form of 2-Wire Bus.Pins on its 12 axis are present.A Surface Mount hole is available for mounting it on a PCB or another board.A voltage of 8.1mA is required to operate this power buffer.You are not supposed to feed the repeter with voltage higher than 5.5V.The splitter requires at least 2.9V to operate.

LTC4315IMS#TRPBF Features

1 channels.
Mainly used in I2C - Hotswap.

LTC4315IMS#TRPBF Applications

There are a lot of Linear Technology/Analog Devices LTC4315IMS#TRPBF Signal Buffers, Repeaters, Splitters applications.

• Network Switches/Routers
• Loopback
• Laptop Computers (for External Video Cards)
• Desktop Computers
• Servers
• Digital Crossconnects
• Backplane Interconnect
• Clock Distribution
• Medical
• DSLAMs