LTC690CN8#PBF Overview

It is mounted through 8 terminals on the power management. Tube-packaging is used. Power management is possible to find a series of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. In this PMIC, you can find 8-DIP (0.300, 7.62mm) functions for your reference. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. IC management conducts in a 5V-voltage supply. When 1 is applied to the power ic, it conducts. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. The total number of pins on this power management is 8. 8 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 4.75V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. A Through Hole mounting type is recommended. Temperature setting for the supervisors should be 0°C~70°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. It is always advisable to use LTC690C, the base supervisor number, when searching for similar PMICs from the manufacturer. It requires 5V watts of power to operate this voltage supervisor.

LTC690CN8#PBF Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 4.75V

LTC690CN8#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC690CN8#PBF Voltage Supervisors applications.

• External alarm
• Important electronics for automotive safety
• Power communication system
• Power distribution systems of infant care room
• Magnetic resonance imaging
• Consumer electronics
• Efficient information transmission
• DC stabilized power supply module
• Unattended substation automation
• Power distribution systems of operating room