LTC6910-2HTS8#TRMPBF Overview

In order to protect the op amps, a SOT-23-8 Thin, TSOT-23-8 case is used. The instrumentation amplifier in this picture is of the Programmable Gain-type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. The total number of pins on linear amplifier is 8. Please take in mind that op amp should be run at 5V. It should be noted that this op amp is a type of Instrumentation Amplifier device. There are 8 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 3mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. A supply current of 3.5mA can be used to operate this linear amplifier. 36dB should remain the voltage gain. On the output type, there are Rail-to-Rail different types of op amps. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 1. Instrumentation amplifier resistance should remain within the range of 100MOhm.

LTC6910-2HTS8#TRMPBF Features

8 Pins
supply voltage of 5V
36dB voltage gain
Output Type: Rail-to-Rail
Resistance of 100MOhm

LTC6910-2HTS8#TRMPBF Applications

There are a lot of Linear Technology/Analog Devices LTC6910-2HTS8#TRMPBF Instrumentational OP Amps applications.

• Oscilloscopes
• Logarithmic operation circuits
• Computer workstations
• Medical instruments
• Radar
• Polarized electrodes
• Hand-held batteries
• Large motor controllers
• Integrator circuits
• Weighing systems