LTC6910-3HTS8#TRPBF Overview

Packaged in a SOT-23-8 Thin, TSOT-23-8 case, the buffer op amp is ready to use. An op amp of this type is a Programmable Gain-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. It is estimated that there will be at least 8 terminations this year. The pins on this board total to 8 in total. Please take in mind that op amp should be run at 5V. I would like to specify that this buffer amplifier belongs to the Instrumentation Amplifier-type of devices. 8 pins are located on the operational amplifiers. The input offset voltage is 3mV. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, op amp ranges -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 3.5mA . It is a member of the 17dB's 17dB family. There are 1 circuits on this op amp. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply. It is important that the linear amplifier resistance stays within the range of 100MOhm.

LTC6910-3HTS8#TRPBF Features

8 Pins
supply voltage of 5V
17dB voltage gain
Output Type: Rail-to-Rail
Resistance of 100MOhm

LTC6910-3HTS8#TRPBF Applications

There are a lot of Linear Technology/Analog Devices LTC6910-3HTS8#TRPBF Instrumentational OP Amps applications.

• Commercial audio systems
• earphone
• Radar
• Signal operation
• Cinema or auditorium audio system
• Integrator circuits
• Division circuits
• Fission chambers
• High/low-pass filter circuit
• PDA