LTC6912IGN-1#PBF Overview

It is packaged in an 16-SSOP (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a Programmable Gain-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 16 terminations this year. A total of 16 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Other Analog ICs op amp ic can be identified by the fact that this is a type of Other Analog ICs device. In total, the buffer amplifier consists of 16 pins. Op amp ic rates 2mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. A supply current of 2.25mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 39.85dB. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. There are 2 elements in this buffer amplifier. It is important that the op amp resistance stays within the range of 10MOhm. This linear amplifier also utiliANALOG CIRCUITes an analog IC known as a ANALOG CIRCUIT.

LTC6912IGN-1#PBF Features

16 Pins
supply voltage of 5V
39.85dB voltage gain
Output Type: Rail-to-Rail
Resistance of 10MOhm

LTC6912IGN-1#PBF Applications

There are a lot of Linear Technology/Analog Devices
LTC6912IGN-1#PBF Instrumentational OP Amps applications.

• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering