LTC694IS8#PBF Overview

This power management consists of 8 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Tube. Power management is possible to find a series of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts at a voltage of 5V. IC management is possible to find a succession of 1 voltages that have been checked. This power ic can be sub-categorized as Power Management Circuits. There are a total of 8 pins on power management. 8 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 4.75V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. It is always advisable to use LTC694I, the base supervisor number, when searching for similar PMICs from the manufacturer. It requires 5V watts of power to operate this voltage supervisor.

LTC694IS8#PBF Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 4.75V

LTC694IS8#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC694IS8#PBF Voltage Supervisors applications.

• Medical-specific isolation transformer
• Electronics installed in the vehicle
• emergency room
• Radio
• Detection of phase loss
• Solar power charger
• Personal computers
• Digitally controlled LDO regulators circuit
• Magnetic resonance imaging
• Important electronics for automotive protection