LTC695IN#PBF Overview

There are 16 terminals on this power management that allow it to be mounted. Tube-packaging is used. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. There are 16-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of NOT SPECIFIED for the package during reflow. Manage ics operate at 5V supply voltages. Power ics operate at 1 supply voltages. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, it has 16 pins on IC management. The mounting type of the supervisors is Through HoleYou should set the supervisor's temperature during -40°C~85°C TA . While in operation, this supervisor has a voltage output of Open Drain or Open Collector. If you want to search for similar IC managements of this manufacturer, you can always refer to LTC695, which is the base power ics number. The power management must be powered by 5V volts to function properly.

LTC695IN#PBF Features

Simple Reset/Power-On Reset type

LTC695IN#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC695IN#PBF Voltage Supervisors applications.

• Rechargeable batteries
• Dash board
• Battery-powered equipment
• Sensitive sensors
• Embedded computing
• Transformer load monitoring equipment
• Electronics installed in the vehicle
• Leakage current detection
• Smart meter
• Smartphones