LICAL-ENC-HS001 Overview

It is embedded in a 20-SSOP (0.209, 5.30mm Width) package so that it can be taken anywhere.Packing the encoder in a Tape & Reel (TR) case would be a good idea.Surface Mount-axis is mounted on this motor encoder.It can be categorized as Remote Control Encoder type.The encoder connected in Alarm Systems, Communication Systems is suitable for this connector.2.0V~5.5V can be used to apply the analog supply voltage to the encoder.Using Surface Mount as a mount, it is attached.Encoders like this have 20 pins.In order for the encoder reader to run in a stable manner, the maximum 85°C must be set.In order for this rotary encoder to work properly, its minimum operating temperature must exceed -40°C.It is 8 bits that make up an encoder.The minimum supply voltage for this rotary encoder is 2V.Across the converter, the maximum voltage that can be supplied is 5.5V.Electrical quadrature encodes of this type are included in the HS series.Performance depends on its frequency working at 418MHz.

LICAL-ENC-HS001 Features

In 20-SSOP (0.209, 5.30mm Width) package
Mounting Type: Surface Mount
20 pins
8 bits

LICAL-ENC-HS001 Applications

There are a lot of Linx Technologies Inc. LICAL-ENC-HS001 Encoders, Decoders, Converters applications.

• Optical Networking
• Car Alarms
• Imaging
• Internet appliances
• Low power consumption
• Remote Device Control
• Low-voltage operation
• LCD bias supply
• Drive recorder
• Automotive