HSDL-5420 Overview

As a protective measure, these photodiodes are packaged in the Bulk. It is necessary to place the photodiodes into 2-SMD, Flat Lead packages in order to protect them from damage. The voltage for the photodiodes should not exceed 40V in reverse-bias mode on a continual basis. Pins 2 are present on the photodiodes. In a circuit, the photodiodes may release 150mW heat. The reverse anode voltage for the photodiodes should be 40V. In order for current to flow across a photodiode, the voltage must be 800mV. In reverse-bias mode, the photodiodes could supply 40V. A photodiode occurs even at 1nA current without light input.

HSDL-5420 Features

Moisture Sensitivity Level (MSL): 2A (4 Weeks)
Operating Temperature: -40°C~85°C
Packaging: Bulk
Diode Type: PIN
Mount: Surface Mount, Through Hole
Spectral Range: 770nm ~ 1000nm
Viewing Angle: 56°

HSDL-5420 Applications

There are a lot of Lite-On Inc. HSDL-5420 Photodiodes applications.

• Photo interrupters
• Solar Cells
• Heart Rate Monitoring
• Vision Controls
• Low Capacitance
• Low Cost Light Monitoring
• YAG laser detection
• High speed photo detectors
• Position sensing
• Infrared remote control