5962-9071101MEA Overview
There are 16 terminals connected to this power management, which makes it easy to mount. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of CDIP functions. There are a lot of similarities between this IC power and other Battery Backup Circuit products. Specifies a reflow peak temperature of 240 for the package during reflow. When a supply voltage of 5V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Using Through Hole, IC management is mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 16 pins on power management. Power managment ic pin count is 16. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 4.75V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. You should set the supervisor's temperature during -55°C~125°C TA . There is an output voltage of Push-Pull, Push-Pull from this supervisor when it is operating. The supervisor's supply current is specified to 10mA. To be able to work, this power management requires 5V volts of power. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 10mA.
5962-9071101MEA Features
Battery Backup Circuit type
Minimum supply voltage of 4.75V
10mA operating supply current
5962-9071101MEA Applications
There are a lot of Maxim Integrated 5962-9071101MEA Voltage Supervisors applications.
- Electronics installed in the vehicle
- Low voltage/high power - AI, GPU
- Microprocessor system
- Smart meter
- Microcontroller system
- Power distribution systems of operating room
- Display equipment
- Solar power charger
- Kitchen appliances
- Dash board
