5962-9073101MEA Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-CDIP (0.300, 7.62mm). The advanced packaging method Tube provides high reliability. The multiplexer is located in Through Hole. Multiplexers and demultiplexers have a number of circuits 1:1. Operation at a temperature around -55°C~125°C TA. There are 16 terminations totally. The electronic part delivers high-quality output through its 1 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. This electronic part can be found in the 16 series. Based on SPST - NC switching circuits, these analog multiplexers work. A 4 circuit is present in this switch device. Internally, this switch multiplexer has a resistance of 100Ohm. Datasheets for 16 pin functions are available upon request. Multiplexer or Switches is a typical switch device. In a normalsituation, users should not supply the switches with voltage higher than 20V. There should be 4.5V voltage fed to the electrical part below 4.5V. A digital multiplexer may suffer damage if voltage is applied above 5μA. There is no problem with using dual supply voltage, but it should not exceed 20V. If you are using dual power supplies, you should attach at least 4.5V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. Operating voltages range from 5V.

5962-9073101MEA Features

1 Channels
Switch Circuit: SPST - NC

5962-9073101MEA Applications

There are a lot of Maxim Integrated 5962-9073101MEA Analog Switches & Multiplexers ICs applications.

• Data Acquisition Systems
• Remote Powered Equipment
• High-Voltage
• Industrial
• PDAs
• Audio signal routing
• Cross Connects
• Microwave transmission systems
• Access Concentrators
• Channelized and Unchannelized DS3 applications