300ns, 250ns DPST - NO 50Ohm Analog Switches BREAK-BEFORE-MAKE DG302A 16 Pins 5nA 15V 16-SOIC (0.295, 7.50mm Width)
SOT-23
DG302ACWE+ Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
6 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-SOIC (0.295, 7.50mm Width)
Number of Pins
16
Operating Temperature
0°C~70°C TA
Packaging
Tube
Published
2008
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
ECCN Code
EAR99
Resistance
50Ohm
Terminal Finish
Matte Tin (Sn)
Subcategory
Multiplexer or Switches
Max Power Dissipation
450mW
Technology
CMOS
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
2
Supply Voltage
15V
[email protected] Reflow Temperature-Max (s)
30
Base Part Number
DG302A
Output
SEPARATE OUTPUT
Pin Count
16
Number of Channels
2
Number of Circuits
2
Max Supply Voltage
25V
Min Supply Voltage
4V
Operating Supply Current
230μA
Nominal Supply Current
1nA
Max Supply Current
10μA
Throw Configuration
DPST
Turn On Delay Time
300 ns
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-15V
Turn-Off Delay Time
250 ns
Max Dual Supply Voltage
18V
On-State Resistance (Max)
50Ohm
Min Dual Supply Voltage
5V
Multiplexer/Demultiplexer Circuit
2:1
Off-state Isolation-Nom
62 dB
Current - Leakage (IS(off)) (Max)
5nA
Channel Capacitance (CS(off), CD(off))
14pF 14pF
Switch Circuit
DPST - NO
Switch Time (Ton, Toff) (Max)
300ns, 250ns
Charge Injection
12pC
Crosstalk
-74dB @ 500kHz
Switching
BREAK-BEFORE-MAKE
Normal Position
NC
Voltage - Supply, Dual (V±)
±5V~18V
Length
10.3mm
Width
7.5mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$18.073026
$18.073026
10
$17.050024
$170.50024
100
$16.084929
$1608.4929
500
$15.174461
$7587.2305
1000
$14.315529
$14315.529
DG302ACWE+ Product Details
DG302ACWE+ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.295, 7.50mm Width). High reliability is ensured by the advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Extended operating temperature around 0°C~70°C TA. There are 16 terminations totally. As a result of its 2 channels, this electronic component provides high-quality output. A 15V voltage supply should turn on and run the electronic component. A key feature of the 16 series is the inclusion of this electronic part as part of its design. On the other hand, analog switches can be constructed using DPST - NO switching circuits. This multiplexer is composed of 2 circuits. Try searching for DG302A variants of the analog switch ic. In this multiplexer, the internal resistance is 50Ohm. Please refer to the datasheets for 16 pins functions. There is a standard Multiplexer or Switches analogue multiplexer here. A voltage higher than 25V should not normally be supplied to the switches. The digital multiplexer has a low cost Dual, Single supply. It is recommended that the electrical component receives a voltage of 4V. An operating current of 230μA would be sufficient for this switch device. Putting voltage greater than 10μA on the multiplexer may cause damage. For this multiplexer, dual supply voltage is feasible, but it should not exceed 18V. The voltage should be at least 5V if you are using dual power supplies. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.
DG302ACWE+ Features
2 Channels Switch Circuit: DPST - NO 230μA Supply Current
DG302ACWE+ Applications
There are a lot of Maxim Integrated DG302ACWE+ Analog Switches & Multiplexers ICs applications.