DG305AAA Overview

This electronic part is conveniently packaged in TO-100-10 Metal Can, making it easy to ship abroad. A switch device like this is mounted in Through Hole. 2:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -55°C~125°C TA degrees Celsius. In total, there have been 10 terminations. A 15V voltage supply should turn on and run the electronic component. Unlike digital switches, these are based on SPDT switching circuits. 1 circuits are used in this analogue multiplexer. Analog switches have 50Ohm internal resistance. To find out what the 10 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 36V to a switch device. Analog switch ics with Dual supply type are cost-effective. There should be 10V voltage fed to the electrical part below 10V. The switch multiplexer may be damaged if it is exposed to voltage greater than 10μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 18V. The voltage should be at least 5V if you are using dual power supplies. Operating voltages of 15V are compatible with the electrical part.

DG305AAA Features

Switch Circuit: SPDT

DG305AAA Applications

There are a lot of Maxim Integrated
DG305AAA Analog Switches & Multiplexers ICs applications.

• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems