DG307AAK/883B Overview

The electronic part can be shipped overseas conveniently because it is packaged in 14-CDIP (0.300, 7.62mm). High reliability is provided by advanced packaging method Tube. Multiplexers like this are mounted in the Through Hole position. Multiplexers and demultiplexers have the same number of circuits 2:1. Operational temperature extended around -55°C~125°C TA. A total of 14 terminations have been recorded. When a voltage supply of 15V is used, the electronic component should be turned on and run. A SPDT switching circuit is used for these analog switches. It consists of 2 circuits. This digital multiplexer has 50Ohm internal resistance. To find out what the 14 pins do, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. normally, users should not supply switches with voltages higher than 18V. It is recommended that the electrical component receives a voltage of 5V. A digital multiplexer may suffer damage if voltage is applied above 100mA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 18V. It is recommended that you attach at least 5V to your dual power supply. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.

DG307AAK/883B Features

Switch Circuit: SPDT

DG307AAK/883B Applications

There are a lot of Maxim Integrated DG307AAK/883B Analog Switches & Multiplexers ICs applications.

• Audio/video switches
• Industrial
• Microwave transmission systems
• Precision test equipment
• CSU
• Medical Instrumentation
• Video signal routing
• Central office
• ISDN NT1/TA
• Fault Tolerant Systems