DG408CY+ Overview

Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tube is used. Multiplexers like this are mounted in the Surface Mount position. There is 8:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around 0°C~70°C TA. Total terminations are 16. A electrical component with 8 channels is capable of high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 16 pins. A 1 circuit is present in this switch device. Try searching with DG408 to find analog multiplexer variants. Analog switches have 175Ohm internal resistance. Datasheets for 16 pin functions are available upon request. It is generally not recommended to supply a voltage higher than 30V to the switch device in normal circumstances. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 5V is the lowest voltage the electrical component should receive. The switch device would be able to operate with 500μA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 20V. You should attach at least 5V voltage if you are using dual power supply. There is a voltage range of 28V operating voltages for the electrical part.

DG408CY+ Features

8 Channels
500μA Supply Current

DG408CY+ Applications

There are a lot of Maxim Integrated DG408CY+ Analog Switches & Multiplexers ICs applications.

• Precision data acquisition
• Communication systems
• CSU
• Fiber In The Loop (FITL)
• Cell phones
• Video signal routing
• Medical Instrumentation
• FTTH
• ISDN NT1/TA
• Industrial