DG408MY/PR-T Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 8:1. Around -55°C~125°C TA is the extended operating temperature. Total terminations are 16. High-quality output is provided by the electronic component's 8 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. Electronic part bodies are injected with 16 pins. Circuits number 1 make up this analogue multiplexer. As far as internal resistance is concerned, it has 100Ohm. Datasheets for 16 pin functions are available upon request. It is a typical Multiplexer or Switches analog multiplexer. An abnormal situation would be for the switch device to be supplied with a voltage greater than 30V. 5V is the lowest voltage the electrical component should receive. For this multiplexer, dual supply voltage is feasible, but it should not exceed 20V. A dual power supply should have at least 5V voltage attached. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC.

DG408MY/PR-T Features

8 Channels

DG408MY/PR-T Applications

There are a lot of Maxim Integrated DG408MY/PR-T Analog Switches & Multiplexers ICs applications.

• Remote wireless modules
• SDH/SONET multiplexers
• Relay Replacement
• SDH
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• ATM
• Access Concentrators
• Medical
• Cross Connects
• Intelligent PBX