DG412FEUE+ Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there are 16 terminations. This electronic part offers high-quality output due to its 4 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. The analog switch ics are built using SPST - NO switching circuits. Search with DG412 if you are looking for analog multiplexer variants. It has an internal resistance of 85Ohm. The functions of 16 pins can be found in the datasheets. In normalcircumstances, users should not exceed 36V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 9V is the lowest voltage that should be fed to the electronic electronic part. A digital multiplexer may suffer damage if voltage is applied above 600μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. In the case of dual power supplies, you should connect at least 4.5V. There is a voltage range of 20V operating voltages for the electrical part.

DG412FEUE+ Features

4 Channels
Switch Circuit: SPST - NO

DG412FEUE+ Applications

There are a lot of Maxim Integrated
DG412FEUE+ Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems