DG413CUE+ Overview

The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tube. It is mounted in the position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature around 0°C~70°C TA extended. Total terminations are 16. High-quality output is provided by the electronic component's 4 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. As part of the design of the 16 series, this electronic part has been incorporated into the system. Based on SPST - NO/NC switching circuits, these analog multiplexers work. Try searching for the analog switch ic with DG413 if you are looking for variants. As far as internal resistance is concerned, it has 80Ohm. For functions related to 16 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. normally, users should not supply switches with voltages higher than 30V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. The lowest voltage the electronic part should receive is 10V. The switch device would be able to operate with 100pA current. A digital multiplexer may suffer damage if voltage is applied above 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. It is recommended that you attach at least 4.5V to your dual power supply.

DG413CUE+ Features

4 Channels
Switch Circuit: SPST - NO/NC
100pA Supply Current

DG413CUE+ Applications

There are a lot of Maxim Integrated DG413CUE+ Analog Switches & Multiplexers ICs applications.

• Access Concentrators
• Cross Connects
• Digital cross connects (DSX-1)
• PCMCIA cards
• CSU
• Digital access cross connects
• Channel Banks
• Power routing
• Ultrasound
• Precision test equipment