DG445CY Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Temperatures around 0°C~70°C TA are extended for operation. Totally, there are 16 terminations. The electronic part delivers high-quality output through its 1 channels. If the voltage supply is 10V volts, the electrical component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. A SPST - NO switching circuit is used to build these analog multiplexers. A total of 4 circuits make up this switch device. If you are looking for variants of the digital switch, trying search with DG445. Internally, this switch multiplexer has a resistance of 85Ohm. For details about the functions of 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 24V to the switch device in normal circumstances. 10V is the lowest voltage that should be fed to the electronic electronic part. There is no problem with using dual supply voltage, but it should not exceed 20V. The voltage should be at least 4.5V if you are using dual power supplies. In this switch multiplexer, there are SEPARATE OUTPUT outputs available.

DG445CY Features

1 Channels
Switch Circuit: SPST - NO

DG445CY Applications

There are a lot of Maxim Integrated DG445CY Analog Switches & Multiplexers ICs applications.

• Public switching systems
• Optical Applications
• Precision test equipment
• Audio and video signal routing
• E1 Multiplexer
• Precision instrumentation
• Audio and video routing
• T1/E1 Terminals
• Modems
• Automotive applications