DG529AK/883B Overview

The electronic part can be shipped overseas conveniently because it is packaged in 18-CDIP (0.300, 7.62mm). In order to provide high reliability, an advanced packaging method Tube is used. Through Hole is where this multiplexer is located. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Extended operating temperature around -55°C~125°C TA. 18 terminations have been made so far. A high-quality output is provided by the electrical component's 4 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. It is injected into the electrical part body with 18 pins. Multiplexers built on a SP4T switching circuit are built. The multiplexer consists of 2 circuits. Internally, this switch multiplexer has a resistance of 400Ohm. Datasheets for functions of 18 pins are available. A analogue multiplexer of this type is a Multiplexer or Switches. A voltage higher than 30V should not normally be supplied to the switches. There should be 4.5V voltage fed to the electrical part below 4.5V. 2.5mA current would be enough for this multiplexer to operate. Despite this switch device's dual supply capability, its voltage should not exceed 20V. It is recommended that you attach at least 4.5V to your dual power supply. An analog IC with the number DIFFERENTIAL MULTIPLEXER is integrated into this board. It can operate from 28V operating voltages.

DG529AK/883B Features

4 Channels
Switch Circuit: SP4T
2.5mA Supply Current

DG529AK/883B Applications

There are a lot of Maxim Integrated DG529AK/883B Analog Switches & Multiplexers ICs applications.

• DSUs
• MP3 players
• Transmit
• Modems
• Channel Banks
• Access Concentrators
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Cellular phones
• Industrial control systems
• Avionics test equipment