DG529DJ+ Overview

The electronic part can be shipped overseas conveniently because it is packaged in 18-DIP (0.300, 7.62mm). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Through Hole. There is 4:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there are 18 terminations. This electronic part offers high-quality output due to its 8 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. There are 18 pins injected into the electronic part body. The analog switch ics are built using SP4T switching circuits. A total of 2 circuits make up this switch device. Search with DG529 if you are looking for analog multiplexer variants. It has an internal resistance of 400Ohm. The functions of 18 pins can be found in the datasheets. In normalcircumstances, users should not exceed 30V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 5V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 3μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. In the case of dual power supplies, you should connect at least 4.5V. There is a voltage range of 15V operating voltages for the electrical part.

DG529DJ+ Features

8 Channels
Switch Circuit: SP4T
3μA Supply Current

DG529DJ+ Applications

There are a lot of Maxim Integrated
DG529DJ+ Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems