The Tube method is used for packaging clock ICs. A Clock PLL is included with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. There are a total of 8 terminations in this file. This electronic frequency generator requires a voltage of 3.3V. This Clock PLL will be fed by Clock as its input. To access the full performance of the electronic component, 1 circuits are implemented. The Surface Mount allows the electrical component to be installed conveniently on the panel. It would take a maximum supply voltage of 3.6V to operate this time clock generator. There should be a voltage supply above 2.7V for this frequency generator in order to ensure its safety. As long as you provide 2.7V~3.6V supply voltage, it will work. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. This electronic component is usually classified as a Spread Spectrum Clock Generator component. According to the base part number DS1086L, its related parts can be found. A 8 pin is available on the clock PLL. Time clock generator is capable of handling a voltage of 3.3V. This clock generator is a member of EconOscillator? series. Frequency generator is able to reali66.6MHze high efficiency when operating at a frequency of 66.6MHz. As a result, the load capacitance of this PLL is 50pF.
DS1086LU+C66 Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V Load capacitance of 50pF
DS1086LU+C66 Applications
There are a lot of Maxim Integrated DS1086LU+C66 Clock Generators applications.