As a clock IC, it is packaged by the Tape & Reel (TR) method. The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package embeds this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. As you can see, it consists of 8 terminations. Basically, this time clock generator needs a voltage of 5V. There is a Clock PLL called Clock which is designed to be the input to this clock generator. Using 1 circuits, the electronic part's full performance can be accessed. RF synthesizers based on this clock provide frequencies up to 32.75kHz maximum. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. There should be 2.7V~5.5V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to -40°C~125°C. In this case, we are dealing with a frequency synthesizer that can be used with CMOS, TTL logic levels. As far as this electronic part is concerned, it can be classified as a Clock Generator component. Microprocessor-specific clock PLL with 8 bits. The related electronic parts of part number DS1099 are listed below. There are 8 pins that are available on the clock PLL. There is an electronic part in this series that belongs to the EconOscillator™ family.
DS1099U-FF+T Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Supply voltage of 5V
DS1099U-FF+T Applications
There are a lot of Maxim Integrated DS1099U-FF+T Clock Generators applications.