DS1813-10 Overview

It is mounted through 3 terminals on the power management. In terms of packaging, power management follows the Bulk model. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find TO-226-3, TO-92-3 (TO-226AA) functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 240. IC management conducts at a voltage of 5V. IC management is possible to find a succession of 1 voltages that have been checked. Power management is included in the Through Hole mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, the power management has 3 pins in it. The pins of the power management system count 3. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 0V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type is Through Hole. The supervisors should be set to the following temperature: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. Supplied with a operating current of 40μA, this PMIC is capable of fully function as specified. Additionally, IC management are a variety of features, for example [0], to name a few. You can always use DS1813, the base supervisor number, to search for similar PMICs of the manufacturer. At most, voltage supervisor can operate at a supply temperature of 40μA. The IC power that you are looking at comes from our well-known EconoReset series product line.

DS1813-10 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 0V
40μA operating supply current

DS1813-10 Applications

There are a lot of Maxim Integrated DS1813-10 Voltage Supervisors applications.

• Important electronics for automotive protection
• External alarm
• DSP
• Radio
• Power distribution systems of operating room
• Transformer load monitoring equipment
• Power distribution systems of CCU
• Electric heating appliances
• Leakage current detection
• Rechargeable batteries