DS1836C-20 Overview

This power management consists of 8 mounting terminals on which it can be mounted. It is packaged with Tube. Please refer to this PMIC for 1 functions. There are 1 channels on this power managment ic that can be found in a series. Please refer to power management for 8-DIP (0.300, 7.62mm) functions. This IC power shares lots of benefits with other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. In a 3.3V supply voltage, the power management conducts. IC management is possible to find a succession of 1 voltages that have been checked. Through Hole mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, IC powers are 8 pins on the board. There are 8 pins on the power managment ic. Supply voltage (Vsup) should be at least 1.2V for this power management. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). In this case, Through Hole is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. During operation, this power management system outputs Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 55μA. You can always use DS1836, the base supervisor number, to search for similar PMICs of the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 55μA. As you may know, this PMIC comes from the well-known MicroManager series product line.

DS1836C-20 Features

Battery Backup Circuit type
Minimum supply voltage of 1.2V
55μA operating supply current

DS1836C-20 Applications

There are a lot of Maxim Integrated DS1836C-20 Voltage Supervisors applications.

• Battery cars
• Important electronics for automotive protection
• Consumer electronics
• External alarm
• Power distribution systems of operating room
• Automotive power systems
• Analog circuit
• Military communications
• DVR
• Sensitive sensors