DS4560S-LO+ Overview
This is included in the 8-SOIC (0.154, 3.90mm Width) package.At present, 1 channels are available.It's packaged in a Tube shape.Total terminations are 8.Device position DUAL is its terminal position.In total, there are 8 pins on it.A supply voltage of 12V can result in high efficiency.According to Surface Mount, it has been set up.Electric components of this type are classified as Hot Swap Controller.For reliable operation, set the temperature to -40°C~135°C.Application General Purpose is available on the device.As you can see in Latched Fault, OVP, Thermal Limit UVLO, it's featured.The device should be able to be powered by a 9V~13.2VV power source.There are numbers in the DS4560 family that include it.8 pins are used in operation.There are Circuit Breaker, Current Limit, Slew Rate features that can be programmed.Positioned in direction of Surface Mount, it is at a right angle.Hot-swappable device is important that the supply voltage (Vsup) is kept above 9V for normal operation of the device.Hot Swap can operate at a maximum supply current of 2mA.In default mode, it outputs 1.The device produces 4AV as its maximum output.
DS4560S-LO+ Features
The terminal position of 8
Features of Latched Fault, OVP, Thermal Limit UVLO
Programmable features of Circuit Breaker, Current Limit, Slew Rate
DS4560S-LO+ Applications
There are a lot of Maxim Integrated
DS4560S-LO+ hot swap controllers applications.
- Avionics systems
-
- Safe board insertion and extraction
-
- Industrial computers and servers
-
- Redundant-array-of-independent-disk (RAID) storage
-
- Other forms of communications infrastructure
-
- Board or blade insertion into live backplanes
-
- Backplane
-
- Loads
-
- Distributed power systems
-
- Redundant negative voltage supplies
-
