ICL7665CPA Overview

This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tube model. To assist you, this IC power includes 1 functions. A series of 2 channels can be found on this supervisor. Please find attached 8-DIP (0.300, 7.62mm) functions for your reference in this IC power. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. Specifies a reflow peak temperature of 240 for the package during reflow. When 5V is applied to the power ic, it conducts. A supply voltage of 2 is used to conduct the PMIC chip. The power management is mounted by a Through Hole-axis. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, IC powers are 8 pins on the board. This power management has 8 pins. There should be a minimum voltage supply (Vsup) of 1.6V for this PMIC. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 16V volts. The recommended mounting type for IC management is Through Hole. We recommend setting the supervisors to 0°C~70°C TA degrees. The output voltage of this power managment ic during operation is Open Drain or Open Collector. A similar IC managements number of the manufacturer can always be found by using ICL7665, the base power ics number. There is a requirement for 5V power to power this power management. The maximum supply temperature that PMIC chip can work with is 15μA.

ICL7665CPA Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1.6V

ICL7665CPA Applications

There are a lot of Maxim Integrated ICL7665CPA Voltage Supervisors applications.

• Solar power charger
• Detection of phase imbalance
• Fire equipment power monitoring system
• Important electronics for automotive protection
• Personal computers
• Low voltage/high power - AI, GPU
• Functional modules
• Set top box
• Dash board
• Medical-specific isolation transformer