ICM7556ISD+ Overview

It is enclosed in the 14-SOIC (0.154, 3.90mm Width) packaging along with the digital timer. There is a programmable timer set at a frequency of 500kHz.It is used to pack in Tube case. There is a recommended mounting type of Surface Mount.The programmable timer is capable of providing a voltage of 2V~16.5V in its output, which can be used to control the clock.The type of chips can be divided into 555 Type, Timer/Oscillator (Dual). The operating temperature of this timer clock is -20°C~85°C. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 60μA voltage. It is based on ICM7556. The timer clock contains 14 pins. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 14 . The number of the chip's terminations sums up to 14. Its subcategory belongs to Analog Waveform Generation Functions. The timer clock runs quiescent current at 600μA. The number of Timers/Counters on the device is 2.

ICM7556ISD+ Features

Operate frequency at 500kHz
Package / Case: Tube
Mounting Type:Surface Mount
Quiescent Current at 600μA
2 Timers/Counters

ICM7556ISD+ Applications

There are a lot of Maxim Integrated ICM7556ISD+ Programmable Timers & Oscillators applications.

• Domestic appliances
• Always On Systems
• Battery-Powered Systems
• “Heartbeat” Timers
• Smart Key
• Consumer Electronics
• Sensor Node
• Remote Data-Logger
• Periodic “Wake-Up” Call
• High Vibration, High Acceleration Environments