MAX1204ACAP+ Overview

The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the SSOP package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 20 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 8 channels.The is equipped with 20 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.There are 20 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Dual describes the type of supply.It is possible to mount the analogue to digital converter using Surface Mount.This electrical digital converter operates from a supply voltage of 5.25V.The maximal analog input voltage of this electrical AD converter is 4.096V.The ADC converter operates from 3/55GND/-5V power supplies. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 640mW.The conversion rate of this electrical AD converter is calculated as 133 ksps.It operates with the maximal operating temperature of 70°C to ensure its reliability.It operates with the minimal operating temperature of 0°C to ensure its reliability.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. The minimal analog input voltage of this electrical AD converter is -4.096V.

MAX1204ACAP+ Features

1 Functions
20 basic kinds of terminations
20 pin count
3/55GND/-5V power supplies

MAX1204ACAP+ Applications

There are a lot of Maxim Integrated MAX1204ACAP+ ADC applications.

• Cell Phones
• Instrumentation and test equipment
• Communications
• Digital beam-forming systems for ultrasound
• Micro and pico cell systems, software radios
• Digital Multimeters, PLC's (Programming Logic Controllers)
• Data Acquisition Systems
• Spectrum Analysis
• Rotary encoder
• Uninterrupted Power Supplies