MAX1301BEUP+ Overview

The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 20-TSSOP (0.173, 4.40mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 20 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 4 channels.The is equipped with 20 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 115k Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-PGA-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.There are 20 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MAX1301 family.There are several types of supply, categorized by Analog, Digital.It is possible to mount the analogue to digital converter using Surface Mount.The ADC converter operates with the maximal supply voltage of 5.25V.2, 4 inputs are employed.It operates with the minimal supply voltage of 2.7V.The maximal analog input voltage of this electrical AD converter is 24.576V.The ADC converter operates from 5V power supplies. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 879mW.The conversion rate of this electrical AD converter is calculated as 115 ksps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. The minimal analog input voltage of this electrical AD converter is -24.576V.PGA can be ensured when operating.

MAX1301BEUP+ Features

1 Functions
20 basic kinds of terminations
20 pin count
Minimal supply voltage of 2.7V
5V power supplies

MAX1301BEUP+ Applications

There are a lot of Maxim Integrated MAX1301BEUP+ ADC applications.

• CMOS Image sensors for mobile applications
• Digital Multimeters, PLC's (Programming Logic Controllers)
• Communication test equipment
• Uninterrupted Power Supplies
• Multicarrier, multimode digital receivers
• Wireless and wired broadband communications
• Digital Storage Oscilloscope
• TD-SCDMA, WiMAX
• Telecommunications
• Digital signal processing