Name: MAX13083EESD+T
Brand: Maxim Integrated
SKU: MAX13083EESD+T
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Number of Pins	14
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Published	2012
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Type	Transceiver
Technology	BICMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	5V
Base Part Number	MAX13083E
Pin Count	14
Operating Supply Voltage	5V
Power Supplies	5V
Nominal Supply Current	1.8mA
Logic Function	Receiver
Data Rate	250kbps
Differential Output	YES
Protocol	RS422, RS485
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	1/1
Driver Number of Bits	1
Receiver Number of Bits	1
Duplex	Full
Receiver Hysteresis	100mV
Interface Standard	EIA-422; EIA-485
Number of Transceivers	1
Receive Delay-Max	200 ns
Out Swing-Min	2 V
Length	8.65mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX13083EESD+T Product Details

MAX13083EESD+T Overview

Due to the enhanced 14-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.The package of this receiver is Tape & Reel (TR).Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.This wide receiver can be placed on any Surface Mount-type PCB or development board.Power supply requirements for this differential driver are 4.5V~5.5V.At any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.IC receiver has been designed primarily for applications operating at -40°C~85°C.This line driver ic can operate efficiently with a supply voltage range of 5V.For driving and receiving signals from data, this wide receiver has 14 terminations integrated.As a standard package, this transceiver comes with a 14-pin layout that follows the market standard.Since the part number MAX13083E represents the product type, temperature, package, etc., you can try searching with that number to find more variants.A 14-pin driver IC with enhanced power dissipation control is featured here.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.An important feature of this ic receiver was its 1-bit resolution capability.In the case of this receiver, a resolution of 1 bits is typically specified.There is a voltage input supply of 5V required for the operation of this integrated circuit.This driver IC is designed to operate from a 5V power supply.It implements 1 transceivers in total.