MAX13171EETU+ Overview

Driver ICs in this category can operate efficiently with a supply voltage range of 3.3V.There are 38 terminations in this wide receiver so that signals can be driven from the data and received.In this package, you will find 38 market-standard pinouts for this transceiver.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.This ic receiver provided a 3-bit resolution capability. There is typically a resolution of 3 bits specified with this receiver.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.IC3.3/5V is a high performance driver IC designed to work with a 3.3/5V power supply.It must be below 85°C when the transceiver module's system is operating.This optical transceiver should not operate at a temperature lower than -40°C.Input current should not exceed 210mA at the VCC pin of the ic receiver.IC type LINE TRANSCEIVER is used to control and manage sharing of information between devices on ic receiver.Manufacturers recommend operating this chip with a voltage below 5.5V.A voltage supply of at least 3.135V is necessary to run this module isolated transceiver.

MAX13171EETU+ Features

38 pin count
3.3/5V power supply

MAX13171EETU+ Applications

There are a lot of Maxim Integrated MAX13171EETU+ Drivers/Receivers/Transceivers applications.

• Vehicle
• Ethernet circuitry
• Cable network front end
• Aircraft positioning
• Low power, low voltage systems
• Home theater wiring-free
• WDM transmission
• Laser diode bonding
• Car alarm systems
• Data center