MAX1452EAE+ Overview

Materials from Tube are used in its packaging.A 16-SSOP (0.209, 5.30mm Width) package can be used to save space.The characteristics of Signal Conditioner enable it to provide superior performance.As its mounting technique, the Surface Mount technique is used.In order to avoid unnecessary cooling, the operating temperature should be maintained at -40°C~125°C.Sensor and detector interface adopts Analog as Sensor and detector interfaces input type.The use of 16 terminations is intended to prevent signals from reflecting off the transmission line's end.By looking up its base part number, MAX1452, related electronic parts can be found.In this case, it is configured with 1 functions.A voltage of 5V is used as the supply voltage.There are 16-pins on the device, so it is an electronic device.Pins on 16 components are designed to perform the specified functions.Maintaining the operating supply current at 2.5mA may improve efficiency.When the supply voltage is exceeded by 5.5V, failures will occur.If the supply voltage is below 4.5V, failures will occur.Sensor and detector interface has been designed to operate at 5V power supplies.This voltage is used in applications with a supply voltage of 5.5V.

MAX1452EAE+ Features

With 5V channels
operate temperature at the range of 2.5mA

MAX1452EAE+ Applications

There are a lot of Maxim Integrated MAX1452EAE+ applications of sensor and detector interfaces.

• System power consumption
• Engine Testing
• Seat Movers
• Hearables
• Simple bus-controlled part for remote control and
• Seatbelt Buckles
• Unmanned Systems
• Camshaft VRS Interfaces
• Photovoltaic systems
• Automatic Lighting (Residential and Commercial)