MAX14757EUE+ Overview

This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. To ensure high reliability, a new packaging method Tube is used. Surface Mount is where this multiplexer is located. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -40°C~85°C TA extended. Total terminations are 16. A electrical component with 1 channels is capable of high-quality output. An electrical component like this is included in the 16 series. These analog multiplexers are built based on SPST - NO switching circuits. The circuits in this analogue multiplexer number 4. Try searching for the analog switch ic with MAX14757 if you are looking for variants. There is 10Ohm internal resistance in this digital multiplexer. To find out what the 16 pins do, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. It is normally recommended that users do not supply the multiplexer with voltages higher than 70V. The analog switch ic is of the Dual, Single supply type and is cost-effective. 10V is the lowest voltage that should be fed to the electronic electronic part. The analogue multiplexer could operate on 500μA current. If you put voltage higher than 800μA on the digital multiplexer, damage may occur. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 35V. With dual power supplies, you should attach at least 10V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.

MAX14757EUE+ Features

1 Channels
Switch Circuit: SPST - NO
500μA Supply Current
-3db Bandwidth: 145MHz

MAX14757EUE+ Applications

There are a lot of Maxim Integrated MAX14757EUE+ Analog Switches & Multiplexers ICs applications.

• Routers
• Microprocessor controlled systems
• Audio and video routing
• Private Branch Exchange (PBX)
• Precision test equipment
• Microprocessor Controlled Analog Systems
• Imaging
• SONET/SDH ADM
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• PCMCIA cards